In July 18, 2023, Kunshan Oneplus Machinery Co., Ltd. completed the commissioning of a PE pipe extrusion line. The diameter of the tested pipe is 110mm and the thickness is 4.4mm. The production line is equipped with an SJ-60/36 single screw extruder with an SJ-25/25 colour line co-extruder. The PE pipe production line is equipped with a Siemens PLC with HMI touchscreen for easy operation. The speed of the production line can reach 2.5m/min, and the output can reach 270kg/h. During the commissioning, the whole line ran smoothly and the quality of the output was stable. The production line has improved the production efficiency while ensuring the high quality of the output products. This machine of the PE pipe production line is developed by Kunshan Oneplus Machinery Co., Ltd, which has the advantages of high output and good efficiency. WONPLUS is a professional manufacturer of plastic machinery and equipment in China. The products of our company are of high quality and exported to all over the world and are well received by customers.

On June 2023, Kunshan Oneplus Machinery Co., Ltd. Completed 5 WPC profile lines which will be shipped to UK. The WPC profile extrusion line are equipped with SJZ-65/132 conical screw extruder. All the extruders are equipped with Siemens PLC control panel for easy operation. The production line also equipped with YF300 dust-free cutter and a 4m calibration table. The whole production line is of high output and good efficiency, ensuring high product quality while improving production efficiency. The machine equipped with the WPC profile production line are designed and developed by Wonplus independently, which has the advantages of high quality and efficiency. WONPLUS is a professional manufacturer of plastic machinery and equipment in China. The products of our company are of high quality and exported to all over the world and are well received by customers.

June 2023, Kunshan Oneplus Machinery Co., Ltd. shipped series of production lines to Indonesia. The production lines are PVC hollow roof line, PVC Solid Roof Sheet Extrusion Line and PVC Ceiling Panel Extrusion Line. The PVC hollow production line is equipped with SJZ-80/156 extruder, and the PVC Solid Roof Sheet Extrusion Line was equipped with an SJZ-80/156 extruder with a mould produced by JCtimes, the thickness of the product was 1.8-2.0mm, and the sheet output was stable during operation. The PVC ceiling panel size is 200*8mm and the thickness is 0.4mm. The line is equipped with SJZ-55/110 extruder and the output is stable throughout the commissioning. The production line adopts hot stamping technology, the extruded PVC panel surface is flat and the pattern is prefect. All three lines use PVC plastic extruders self-developed by Wonplus, which have the advantages of high output and good efficiency, ensuring high product quality while improving production efficiency. Kunshan Oneplus Machinery Co., Ltd. is a professional manufacturer of plastic machinery and equipment in China. WONPLUS plastic extruder has high output, stable quality and considerate service. It is exported to all over the world and is well received by customers.

Kunshan Oneplus Machinery Co., Ltd. completed the commissioning of a PPR pipe extrusion line with a diameter of 25 mm and a thickness of 4 mm. The production line is equipped with an SJ-65/33 extruder with an SJ-25/25 colour line co-extruder. The extrusion line is equipped with a Siemens PLC with HMI keypad for easy operation. A double-station winder is also equipped to further improve efficiency. During the commissioning, the whole PPR pipe machine ran smoothly and the quality of the output was stable. The production line has improved the production efficiency while ensuring the high quality of the output products. This machine is a PPR pipe extruder developed by Kunshan Oneplus Machinery Co., Ltd, which has the advantages of high output and good efficiency. WONPLUS is a professional manufacturer of plastic machinery and equipment in China. The products of our company are of high quality and exported to all over the world and are well received by customers.

On 12 May 2023, Kunshan Oneplus Machinery Co., Ltd. completed a commissioning of a PVC Ceiling Panel Extrusion Line. The test PVC panel size is 200*8mm and the thickness is 0.4mm. The line is equipped with SJZ-55/110 conical twin screw extruder and the output is stable throughout the commissioning. The PVC panel production line adopts hot stamping technology, the extruded PVC panel surface is flat and the pattern is complete. PVC panels are widely used in home and building decoration. It is lightweight, easy to install, water and moisture resistant, moth proof, and has a wide range of surface patterns, and is pollution resistant, easy to clean, and has good sound and heat insulation. The addition of flame-retardant materials in the production makes it safer to use as it is extinguishable from fire. Kunshan Oneplus Machinery Co., Ltd. is a professional manufacturer of plastic machinery and equipment in China. WONPLUS has various plastic extrusion lines with high output, stable quality and good service, which are sold all over the world and well received by customers.

Kunshan Oneplus Machinery Co., Ltd. completed the commissioning of PVC granulation line. During the commissioning, the machine ran smoothly and the output of PVC granules was stable, and the finished PVC granules was relatively consistent. With the SJZ-65/132 main machine, the PVC pelletizing machineoutput of the trial machine was about 350kg/h. The PVC granulator is mainly used to granulate PVC granules. In the granulation process, calcium carbonate, masterbatch, PVC stabilizer, wax, stearic acid, titanium dioxide, etc. can be added, and the output PVC granules can be widely used for extrusion, injection moulding and the production of soft PVC products. Kunshan Oneplus Machinery Co., Ltd. is a professional manufacturer of plastic machinery and equipment in China, which has high output, stable quality and considerate service. The products of our company are exported to all over the world and is well received by customers.

On April 12, 2023, Kunshan Oneplus Machinery Co., Ltd. completed the commissioning of a PVC square pipe extrusion line. The diameter of the tested PVC square pipe is 25.3mm and the wall thickness is 1.8mm. The test production line is equipped with an SJZ-65/132 extruder with GF63-2 double-outlet auxiliary machine and the pipe output is stable. The PVC pipe extruder in this test is independently developed by Wonplus, which has the advantages of high output and good efficiency. The running speed of the production line can reach 6m/min after speeding up, and the output can reach 183kg/h. The line equipment can also be used to produce conduit after replacing the corresponding moulds, and the running speed can reach 20m/min correspondingly. During the commissioning, the whole production line was running smoothly and the quality of the output pipe was stable, which improved the production efficiency while ensuring the high quality of the products. Kunshan Oneplus Machinery Co., Ltd. is a professional manufacturer of plastic machinery and equipment in China, which has high output, stable quality and considerate service. The products of our company are exported to all over the world and is well received by customers.

On April 17-20, 2023, the 35th Chinaplas Exhibition was successfully concluded in Shenzhen World Exhibition & Convention Center. Kunshan Oneplus Machinery Co., Ltd. participated in the exhibition as scheduled and displayed our latest SJZ-65/132 conical twin screw extruder and SJ-60/38 single screw extruder, of which the maximum actual output of conical twin-screw extruder can reach 450-500kg/h and the maximum actual output of single-screw extruder can reach 400-450kg/h. Besides the extruders, the company also exhibited a large number of samples for customers' reference. The company not only consolidated the existing cooperation relationship in this exhibition, but also actively explored new customers, which laid a certain foundation for developing new markets. In addition, we also exchanged and learned from our peers at the exhibition, and further understood the industry trend, which has a certain guiding effect on the future development of the company.