Four Cavity PVC Conduit Pipe Extrusion Line is WONPLUS advantage machine, single pipe line speed can reach 5-7m/min, which means one time can make 20-28m/min, it's a very good propossal for electric conduit pipe production.

Main Features:

1. Production capacity: The daily capacity of the traditional one is about 3 tons and the one of WONPLUS four-pipe extrusion line is 5-8 tons.

2. Power consumption: For per ton output, the power consumption of the traditional on is 200Kwh and WONPLUS four-pipe extrusion line is 80Kwh.

3. Water and air consumption: WONPLUS optimized cooling water channel and air circuit make the water and air consumption is 25% of the one of the traditional one.

4. The floor area: WONPLUS haul-off and cutter is in all-in-one design and the floor area is about half of the traditional one.

5. Manpower resources: The number of the necessary staff for both of the extrusion lines is two.

6. The noise pollution: The saw of traditional cutter makes piercing noise while WONPLUS chip-less cutter cutting without noise.

7. Dust pollution: The traditional saw cutting cause severe dust pollution and the material tend to be wasted. And the one of WONPLUS chip-less cutting causes no dust.