SMP series pulverizer belongs to disc-type pulverizer series, with it’s disc diameter from 350mm-800m. It is widely used in grinding materials with moderate hardness. It is applied for process materials such as PE, PVC, PP, ABS, PA, EVA, PET, PS, PPS, EPS, PC, Styrofoam, Cow leather, etc.
Brand:
WONPLUSItem NO.:
SMPPayment:
T/T, L/CProduct Origin:
Kunshan city, ChinaShipping Port:
Shanghai portLead Time：
30-60 daysBrief:
Plastic PVC pulverizer is utilized to grind crushed PVC scraps into fine powder for recycling production waste in rigid PVC plastic industry, such as PVC pipe, PVC profile, PVC ceiling, PVC wall panel. the model available are SMP400,SMP500,SMP600,SMP800, the output capacity of pulverizer from 50kg/h to 380kg/h. and special requirement on pulverizer can be customized.
Features and Application:
Waste plastic grinding granulator machine is used in waste plastic recycling, extrudering plastic recycling and plastic pipe crush recycling.
1. compared with other grind machine, it has large output with the same energy consumption, saving energy.
2. equipped with dust collecting device can reduce dust pollution
3. adopting discharge with airlock can reduce the labor intensity of operators
4. the cover plate of the main machine can be opened ,it is convenient for maintenance and replacement of the knife.
Machine Advantage:
1. This type can grind all kinds Hard & Soft materials into 10-80 mesh powders in normal temperature
2. A widely use range, PVC/PE/PP/ABS/PS/PA/PC Materials
3. This machine has a more higher output, 2 or 3 times than normal miller, equip with Dust collector. An ideal energy saving machine in plastic industries
4. This miller includes automatic feeder, main engine, air fan conveying, cyclone separator, automatic shaker screen, auto coarse material milling again, high-efficiency dust collector system. Automatic and space saving.
5. The sword adopted imported stainless steel, durable, can work continuously
6. Knife can be adjusted easily, easily maintained and control
7. Main shaft adopted SKF, matched with oil pump imported, can used about 3-4 years in normal using.
Technical Specifiation:
|
Model |
SMP-500 |
SMP-600 |
SMP-800 |
|
Motor power (kw) |
37kw |
55kw |
75kw |
|
Blow power (kw) |
3kw |
5.5kw |
11kw |
|
Voltage |
380V, 50Hz (or according to customer) |
380V, 50Hz (or according to customer) |
380V, 50Hz (or according to customer) |
|
Total power |
41kw |
52kw |
90.5kw |
|
Blade Dia. |
500mm |
600mm |
800mm |
|
Feeding material size |
Below 10mm |
Below 10mm |
Below 10mm |
|
Output size |
40-80mesh |
40-80mesh |
40-80mesh |
|
Vibration model |
ZDS-800 |
ZDS-1000 |
ZDS-1200 |
|
Capacity |
200-300kg/h |
300-500kg/h |
500-600kg/h |
|
Machine size(mm) (L*W*H) |
2500*2000*3000mm |
3200*2600*3200mm |
3500*2400* |
Related Tags :
PVC hollow corrugated roof tile is widely used as factory roof, warehouse roof, agricultural market roof etc.The roofing tile has long service life. Good anti-corrosion ability and anti-impact ability. Fire proof, UV proof, noise isolation.Easy installation and low transportation cost.
800-1600mm HDPE pipe extrusion line is a large size pipe production line.High capacity extruder with stable die and downstream, together with Gravimetric system and Siemens PLC, the pipe production efficiency is super high. More and more big size pipes are widely used in public project, for water supply&discharge, gas transport, etc.
PVC ceiling profiles is widely used in home decoration. According to customer’s requirements, most suitable screws can be made so as to make best plasticity state and material quality. High plasticity state, low power consumption, high cost performance.
20-63mm PE PPR pipe extrusion line is a small size production line, normally equipped with pipe coil winder, widely used to irrigation and drinking water supply. According to customer’s required, can make multilayers pipe, the structure could be AB, ABA, ABC and so on.
Parallel twin screw extruder is a kind of equipment for extruding PVC powder, PVC wood (WPC) powder, or PE wood pallets, using different kind of mould and auxiliary machine, can produce different kinds of PVC pipes, profile, panel, sheet, roofing, flooring, board and granules.
single screw extruder machine is specially designed for extruding plastic material such as : PE, PP, PPR PERT, etc. It is using different kind of mould and auxiliary machine, can produce different kinds of PE/PPR pipe, profile, panel.
Equipped with relevant mould, the automatic belling machine could bell the plastic pipe into U type and R type automatically.
Conical twin screw extruder is a kind of equipment for extruding PVC powder, PVC wood (WPC) powder, or PE wood pallets, using different kind of mould and auxiliary machine, can produce different kinds of PVC pipes, profile, panel, sheet, roofing, flooring, board and granules.
No. 17, Xiwei road, Qiandeng town, Kunshan city, Jiangsu province, China
Email : jelf@wonplus.com.cn
Skype : luoyefeiying
Tel : +86-18962213276
Whatsapp : +86-18962213276
IPv6 network supported 
